Home » TRANS INSTRUMENTS » ► PH » WalkLAB (TI9000)
WalkLAB (TI9000)
WalkLAB (TI9000)
Product Code: TI9000
Availability: In Stock

Comment(s) / Special Request(s):

Add to Cart
Product WalkLAB (TI9000)
  pH mV Temperature
Range: 0 to 14 pH ± 999 mV 0 to 100°C
Display Resolution: 0.01 pH  1 mV 0.1°C
Accuracy (machine only): ± 0.01 pH ± 1 mV ± 0.5°C
Temperature compensation: Automatic or manual from 0 to 100°C
Operating Temperature: 0 ~ 50°C
Operating humidity: Maximum 90% relative humidity
Slope recognition: ± 20% at pH 4 and pH 10
Offset recognition: ± 60 mV at pH 7
Input impedance 10¹² ohms
Battery type: DC9V (1604A, 6LF22 or equivalent)
Battery life: ~ 200 hours
Size: 164 x 83 x 35 mm
Weight: 350gm (main unit including battery)
Standard Accessories 1. Main instrument
2. PE03 - Epoxy body combination pH electrode
3. TP200 -pH microprocessor temperature probe (Stainless steel)
4. 7010 - Buffer solution pH7.00 90ml
5. 4010 - Buffer solution pH4.01 90ml
6. Carrying case
7. Operation manual
Additional Info - Automatically locks reading when a stable reading is established. This feature can be disabled to allow continuous reading display

- Meter automatically shuts off after 5 minutes after the last key co mmand. This feature can be disabled while reading in continuous read mode

- The meter’s one-touch auto-calibration procedure uses only one button to activate the mode. The unit will prompt and confirm offset and slope point calibration